Update on Oswego Kitchen Renovation

As part of the ongoing kitchen remodel in Oswego we are building a curved wall to serve as an eat-in seating area. I thought I would take some time to show how a curved wall is built and how it turned out.

The first step is to construct curved top and bottom plates from plywood. We used the dimensions from the plans to layout the arcs on a full size template and traced that onto sheets of plywood. Next, studs are cut and spaced every couple of inches on the tight curves and further apart as the shape changes. Now we apply a layer of thin flexible plywood over the frame using glue and staples.

Becuase this plywood is so thin (1/8″) we add a second layer using contact cement to give the wall more strength and rigidity. Lastly, we cover everything with the final layer of cherry veneer shown here. As you can see it is extremely flexible. Again it is attached using contact cement.
Now the wall is set in place where it flows smoothly from one cabinet to another. Later the painters will stain and varnish the cherry veneer to match the Fieldstone Cabinetry.

Now that the granite counters are installed you can see that the curved wall follows the curve of the counter. Also note how the counter flows right into the window. All together a lot of nice details that will make this kitchen very special and perfect for the needs of the family that live here.